Buildings use frp sheet to effectively reduce lighting energy consumption

Views: 7     Author: Site Editor     Publish Time: 2019-10-16      Origin: Site

Buildings use frp sheet to effectively reduce lighting energy consumption

Due to their common advantages, lighting panels have been widely used and applied in recent years, especially in the construction industry, and their dedication is well known, and it has greatly promoted the development of lighting panels.we are frp sheet suppliers and provide frp sheet,you can know it.

Reducing the energy consumption of the building, adding the indoor comfort lighting panel, the upper opening window is smaller, so that the air conditioning load is not severely added; and the lighting panel is introduced into the room through the upper window, and the lower part of the large area is opened. The window acts as an external shading.

When the lighting board manufacturers optimize the lighting board, the energy saving effect will become more and more obvious. From the imitation results, it can be seen that the air conditioning load is significantly reduced after using the lighting board. This is very worthwhile for the promotion of energy conservation and emission reduction today. The lighting panels are widely used. We have used the examples of the use of the lighting panels to show the localities it uses.

Outstanding natural lighting effect lighting panels have improved the lighting effect of large-depth buildings, so even the most simple table-top lighting panels can effectively add illuminance at 4~9m indoor interval window throughout the day, improving the whole The uniformity of lighting in the room. It is particularly effective when the outdoor natural light is low in the morning, at dusk, and when the summer sun elevation angle is high.

Compared with general buildings, the interior lighting of buildings installed with lighting panels is better, and the utilization rate of natural light is higher. In another aspect, the use time of the lights in the building is reduced, and the power consumption is reduced, which not only saves the enterprise cost but also saves public resources.

Various advantages of FRP lighting panels

FRP lighting panel FRP lighting panel introduction:

Good corrosion resistance

FRP lighting panels are outstanding corrosion-resistant materials that have good resistance to atmospheric, water and general concentrations of acids, bases, salts and a variety of oils and solvents. It has been applied to all aspects of chemical corrosion protection and is replacing carbon steel, stainless steel, wood, non-ferrous metals, etc.

Good use of electric power

It is an excellent insulating material used to make insulators. Excellent dielectric properties are protected at high frequencies.

Outstanding thermal function

FRP lighting panels have low thermal conductivity and are excellent thermal insulation materials. In the case of transient ultra-high temperatures, it is an aspirational thermal protection and ablation resistant material.

Overview of lighting panel product features:

1.Weather resistance, not easy to age, no deformation at 80 degrees Celsius, no weathering and peeling.

2.Good heat insulation and warmth

3.Non-toxic, non-classified asbestos carcinogenic microbes, in line with international health standards

4.Do not grow moss, avoid microbial attachments under proper construction, and resist strong winds.

5.The texture is tough and impact-resistant, and the wheel can be restored to its original state.

6.Safe and reliable, open fire does not support combustion, fire target title Experimental method Experimental results Toughness folding does not crack against wind, pressure, anti-aging, anti-folding, anti-strength, weather resistance.we are frp sheet suppliers and provide frp sheet,you can know it.

It has the characteristics of continuous molding, infinite extension, light weight, high strength, aging resistance, light transmission, flame retardancy, accurate scale, smooth surface, random coloring, protection-free, green environmental protection, etc. The products are widely used in large-scale construction and industrial factory houses. Lighting, agricultural vegetable greenhouses, public sports venues, as well as warehouses, greenhouses, stations, terminals, airports, commercial buildings, steel structures and many other lighting categories.

frp sheet suppliers frp sheet

Hot Products


Be the first to know about our latest products.


Quick link

Contact us

Call us