|Anti-rust treatment||hot zinc spray, epoxy primer(twice), acrylic acid black paint, hand applied faux finish, varnish coat|
|Function||balustrade/newel post/kingpost/platform pillar, mount in floor|
|Packaging||standard cartons packing|
|Delivery time||Within 15-20 days after received the payment|
|Remark||All kind of designs can be produced according to your requirements|
Kindly Note Below:
1. Customized design is available.
2. Material and dimensions can be changed as per clients' requirement.
3. Price varies on material and dimensions.
What is the stainless steel stair(stair pipes) installation method?
What is the installation method for stainless steel stairs? What are the advantages of stainless steel stairs? Installation of embedded parts, due to the construction of the above-mentioned post-embedded parts, there may be errors.
Therefore, before the column is installed, the line should be re-disposed to determine the accuracy of the buried plate position and the welding pole. If there is any deviation, correct it in time.
It should be ensured that the stainless steel columns are all seated on the steel plate and can be welded around. When installing the column to weld the column, it is necessary to cooperate with two people. One can hold the steel pipe to keep it vertical, and it can't shake when welding. The other person applies welding, and it should be welded around and should meet the welding specifications.
The handrail is connected with the column, and the column is placed by the extension line before installation, and the groove is formed at the upper end according to the inclination angle of the site and the roundness of the handrail used.we are provide stair pipes,you can know it.
Then put the handrail directly into the groove of the column, and install the spot welding from one end to the other end. The adjacent handrails are installed correctly and the seams are tight.
After the adjacent steel pipes are butted, the joints are welded with stainless steel electrodes. Before welding, the oil, burrs, rust spots, etc. within the range of 30 to 50 mm on each side of the weld must be removed.
What are the advantages of stainless steel stairs?
1. Install the embedded parts - pay the line - install the column - the armrest is connected with the column - polished and polished. Before the column is installed, the wire is laid out by the extension line, and the groove is formed according to the angle of the site and the roundness of the handrail used. 2. Next, the handrails are placed in the groove of the column and then spot-welded. The adjacent handrails are installed correctly and the joints are tight.
3. After all the grinding and polishing are done, sand the weld with a hand-held sand grinder until the weld is not visible. Polished with flannel sand or felt for polishing, and the corresponding polishing paste is used until it is almost the same as the adjacent base metal, and the weld is not visible.
One step: Since the stainless steel staircase needs to be professionally designed, after comparing with the actual staircase, the model of the stainless steel stair material is selected. The type of the stainless steel stair material is usually 202 or 304.we are provide stair pipes,you can know it.
Different stainless steel stair materials have different thicknesses and their thickness is chosen according to our own needs.
Two steps: After selecting the material of the stainless steel staircase, it is to design the selected material, and it is necessary to design its height.
The decorative stair pipe are very popular in middle east countries,we can make different types with different colors according to clients’ request.
we can provide Stair Pipes decorative stair post,and provide fiberglass reinforced polyester panel,we are pre-galvanized steel pipe supplies,rectangle steel pipe wholesale,china round steel pipe exporter,you can know it.