there is no big advantage in price, but the product is colorful, but it is similar.we are provide frp sheet,you can know it.
Anti-corrosion FRP Sheet
Component: anti-corrosion resin
Surface Treatment: coated with good resistant ageing film
Fiberglass: fiber > 30%
Standard Thickness: 1mm,1.2mm,1.5mm,2.0mm
Heat Resistance: -45℃-140℃
Uvioresistant: can block 99%
Life of Using: more than 15 years
Usage: for the higher request of the anti-corrosion type industrial and humen building.
Choosing cheats for the color of the lighting board
The top decoration owners should consider the floor before the decoration, the floor tiles and the floor, the door painting or painting, the color of the lighting board, etc. The color of the ceiling of the lighting board is not the same as the depth of the ground. Generally speaking, the upper limit of the house should not be deeper than the floor color, especially It is if the lighting board is not high, and the color of the light. The best choice is to participate in a lot of white (white, light blue), gray or near white.we are provide frp sheet,you can know it.
In three-dimensional space, under natural light conditions, the floor is the brightest, the wall is the brightest, the wall is the second brightest, and the daylighting panel is the darkest. There are equipment, lights, air and smoke detectors on the lighting board. The lighting panel is painted black and a simple sense of crushing occurs. The best choice for the color of the lighting is to participate in a lot of white (light white, light blue), gray or near white.
Most designers consider space and atmosphere to use pure white is the safest, but want to invent an atmosphere, for example, make the restaurant in the House mystery, secret, even in the grotto feel, you can use black and other colors deep purple and pure black The color. Together, it also depends on the color and raw materials of the floor and wall. It shouldn't be too heavy and simple. There is a feeling of crushing.
Considering that the photometer and the high and low lighting panels are smaller than the wall lamps, the selection has a swelling effect than the light color of the wall 1. The low-light panels (240 cm below) are light-coloured, and the height of the panels (250 cm) is the same as the wall, but the "no-light" rule is adhered to.
Points to pay attention to purchase of FRP lighting panels
The integrated ceiling contains the primary information: gussets, lights, electrical modules, ancillary materials: keels and side strips. The electrical modules can be selected by the owner, and the manufacturer first uses the gussets to calculate the price, including lighting, auxiliary materials and labor costs.
It is not difficult to see after the installation, but a beautiful, harmonious top shape, and this small effect is the harmony and harmony, and the harmony of the three construction points.
The reason why the integrated ceiling structure is important is that it combines the ceiling module and the electrical module, and is made into a modular modular module, and then assembled together. The keel on the keel is firmly attached to the top of the room. The details often result in resolutions, and the marginal connection process is a necessary function of the product. The products in the mall can do this. The difference is whether it is good.
With regard to integrated ceilings, such products require the installation of scientific devices to maximize their value, every aspect of the service, as well as every hardware device, and even a general general information, will affect its ultimate use. Thus, it can be said that the quality of the integrated ceiling is solid.
However, the domestic integrated roof shopping malls are mixed, including AIA, auhua, Aupu and other domestic brands, as well as some foreign brands of phix, a large number and difficult to distinguish.
Objectively speaking, the price of the product is not low, there is no big advantage in price, but the product is colorful, but it is similar.we are provide frp sheet,you can know it.
Whether the product is personalized or not is not significant. This can be said to be the two main drawbacks of Philippe. Of course, in the absence of personalized products, this is one of the reasons for the profession. The reason is that the barriers to entry are low, the products are copied, and the phenomenon of following the wind is severe.