Views:2 Author:Site Editor Publish Time: 2019-11-05 Origin:Site
stair pipes installation instructions
1.Fix the top and bottom of the column first, then pull a straight line between the top of the two columns, and then place the middle column on the step (note that the column can be moved back and forth on the step, put the column At the same height as the line,) draw a punch mark in the fixed hole of the column with a marker, and then punch the fixed column.
2.If it is already paved with floor tiles or marble, you can first use a glass drill to punch holes. Before punching, you can use plasticine to surround a circle around the hole to be used for water storage and better punching. When punching, the drill bit is first inclined to contact with the ground for a small area. After cutting a small opening with the ground, the drill bit is slowly in full contact with the ground. If the drill bit starts to drill, it will be in full contact with the ground.
The drill bit is easy to slip. After the glass drill bit is punched, the drill bit is punched. If the foundation is a wooden board, the self-tapping screw can be used to directly fix the column.
3.Wear brushed wire with a thin self-contained water pipe, put it into the wire drawing, and use your hand to bend it where you need to bend it. This can save some effort. You can also hold the wire and socket directly with a hand pliers, but you should put something on the surface to avoid scratches on the surface of the wire.
If the diameter is over 12 mm, the wire can be bent with a special tool. When the wire is drawn, the position of the wire bending is first determined. After the bending, the wire can be put on the wire, and after the wire is placed, The threading hole is fixed to the column.
Solid wood stair pipes installation and precautions
1. Stair pillar installation - stair steps
(1)The height and width of the stair step are determined by the step size of the person and the length of the person's leg. In short, there is a certain relationship with the height. When the adult walks, the average step is 60-62 cm.
(2) The width of the step should be less than 24 cm. The starting step of the stair pipes can be 2-5 cm wider; the height of the step is usually not more than 7.5 cm, and the step height of the residential building should be below 20 cm.
2.Stair pillar installation - the slope of the stairs
The slope of a typical indoor staircase is 20-45 degrees, and the appropriate slope is about 30 degrees. This will not be difficult to walk.we are stair pipes suppliers,we can guarantee quality.
3.Stair pillar installation - step width
(1)If it is a single-passage step, the width is generally not less than 80 cm, and the double-passage step is generally within l00-120 cm.
(2)If the three-passenger ladder is generally 150-180 cm, when the width of the ladder is greater than l80 cm, please set the wall handrail to facilitate walking.
Customer for the purpose, to satisfy every customer's pre-sales and after-sales service needs
Market-oriented, seeking and respecting every reality and potential customer
Factory management as the core, increase sales and market share and coverage
The new development is based on the standardization, serialization of the perfect design, product technology and continuous innovation.