Views:5 Author:Site Editor Publish Time: 2019-11-09 Origin:Site
stair pipes installation instructions
1.Fix the top and bottom of the column first, then pull a straight line between the top of the two columns, and then place the middle column on the step (note that the column can be moved back and forth on the step, put the column At the same height as the line,) draw a punch mark in the fixed hole of the column with a marker, and then punch the fixed column.
2.If it is already paved with floor tiles or marble, you can first use a glass drill to punch holes. Before punching, you can use plasticine to surround a circle around the hole to be used for water storage and better punching. When punching, the drill bit is first inclined to contact with the ground for a small area. After cutting a small opening with the ground, the drill bit is slowly in full contact with the ground. If the drill bit starts to drill, it will be in full contact with the ground.
The drill bit is easy to slip. After the glass drill bit is punched, the drill bit is punched. If the foundation is a wooden board, the self-tapping screw can be used to directly fix the column.we are stair pipes manufacturers provide stair pipes,you can know it.
3.Wear brushed wire with a thin self-contained water pipe, put it into the wire drawing, and use your hand to bend it where you need to bend it. This can save some effort. You can also hold the wire and socket directly with a hand pliers, but you should put something on the surface to avoid scratches on the surface of the wire.
If the diameter is over 12 mm, the wire can be bent with a special tool. When the wire is drawn, the position of the wire bending is first determined. After the bending, the wire can be put on the wire, and after the wire is placed, The threading hole is fixed to the column.
4.Fix the handrail: first measure the place where the bend is needed. The hot-bend blanket is heated for about 20 minutes with the handrail that needs to be bent. The handrail can be softened and bent.
(If the hot-bent blanket is very long, you can loosen the hot-bent blanket where you don't need to bend it.) Remove the hot-baked carpet, put the handrail on the column, and then use the warm towel prepared in advance to cool the handrail so that the handrail is smooth. Forming the camber.we are stair pipes manufacturers provide stair pipes,you can know it.
Wipe repeatedly until the arm rests. If the handrail is scratched during transportation or daily use, it may affect the appearance, and the heating blanket may be used to remove the scratch after heating and rubbing.
We are unique in the industry with its unique production process. Its products have been in short supply and are favored by customers.
Our entrepreneurial spirit: science and technology, quality, excellence, honesty and trustworthiness. The company as always has "quality is successful, service is perfect"